American Microwave Corporation
7309-A Grove Road
Frederick, MD 21704

Phone:301-662-4700
Fax:301-662-4938
sales@americanmic.com
 

ISO -9001:2015

In Pursuit of Excellence
Through Engineering since 1978

SWN-4TDR-HILL

 
SWN-4TDR-HILL is a 2.0 to 18.0 GHz
Reflective, SP4T Pin Diode Switch with a
MIL-Spec RF and Multipin Connector

Specifications:


 Frequency Range

2 – 18 GHz


 Insertion Loss
  

  2 – 11 GHz @ 2.5 dB
11 – 16 GHz @ 2.8 dB
16 – 18 GHz @ 3.1 dB


 Insertion Loss Balance

The Insertion Loss Difference Between any Two of the Four
RF Channels Does not Exceed 0.7 dB at any Given Frequency
Within the Pass-Band of the Switch.

The Insertion Difference Between J2-J5 and J4-J5 or
J1-J5 and J3-J5 when either Pair of Channels are in the
Insertion Loss State and when One of the Two Arms are
Terminated into 50 Ohms, Does not Exceed 2.2 dB at any
Given Frequency Within the Pass-Band of the Switch.


 Isolation

45 dB Minimum


 VSWR

2.2:1 Maximum on any One Arm in the Insertion Loss State
and 4.4:1 on Two Arms in the Insertion Loss State (With
These Terminated into 50 Ohms)


 Speed

Delay
On: 200 nS Maximum
Delay
Off: 200 nS Maximum


 Power Input

(CW) +20 dBm


 Survival Power

1 Watt CW or 100 Watts Peak with a 0.005 Duty Cycle with
any One RF Channel in the Insertion Loss State and 250 mW
CW or 25 Watts Peak with Two Channels in the Insertion
Loss State


 Control

TTL Logic “0” (0 to +0.8 Volts)=On
“1” (+2 Volts or Greater)=Off


 Power Supply

+ 5V @ 105 mA Maximum (One RF Channel On)
+ 5V @ 70 mA Maximum (Two RF Channels On)
-15V @ 60 mA Maximum (One RF Channel On)
-15V @ 70 mA Maximum (Two RF Channels On)

Environmental Ratings:

Our standard
environmental ratings are as follows, for specific
requirements please contact us…

 Temperature:
 -55 ºC to +85
ºC Operating
 -65
ºC to +125 ºC Non-Operating
 Humidity:  MIL-STD-202F,
Method 103B Cond. B
 Shock:  MIL-STD-202F,
Method 213B Cond. B
 Vibration:  MIL-STD-202F,
Method 204D Cond. B
 Altitude:  MIL-STD-202F,
Method 105C Cond. B

 Temperature Cycle:
 MIL-STD-202F,
Method 107D Cond. A

 

Outline Drawing:

Click here to see the Outline Drawing for

SWN-4TDR-HILL

 

Product Feature:

Click here to see the Product Feature for

SWN-4TDR-HILL

 

Test Report:
Click here to see the Test Report for

SWN-4TDR-HILL

 

First Article Approval:

Click here to see the First Article
Approval for

SWN-4TDR-HILL