American Microwave Corporation
7309-A Grove Road
Frederick, MD 21704

Phone:301-662-4700
Fax:301-662-4938
sales@americanmic.com
 

ISO -9001:2015

In Pursuit of Excellence
Through Engineering since 1978

SWN-218-4DT-05-48-RN

 
SP4T Non-Reflective Switch with
Integrated Driver

Specifications:


 Frequency

4 – 8 GHz


 Insertion Loss

1.8 dB Maximum


 Isolation

60 dB Minimum


 Input/Output VSWR

2.0:1 Maximum All Ports any Switch Position


 Switching Time

750 ns Maximum, 50% Logic to 90% RF


 Conductive and Radiated RF
    Leakage From Bias and
    Control Ports

-80 dBc Maximum


 Harmonic Content

-65 dBc Maximum @ +10 dBm


 Residual Phase Noise

Goal
Offset Frequency            
Maximum Phase Noise
100 Hz                             
-155 dBc/Hz
1 KHz                               
-165 dBc/Hz
10 KHz                             
-175 dBc/Hz
100 to 10,000 KHz           
-178 dBc/Hz


 Input/Output RF Connectors

SMA Female


 Input Signal Power
   (Into 50 Ohms)

+20 dBm Maximum Without Performance Degradation,
1 Watt Average Survival


 Driver Bias Voltage

+5 VDC ±0.25 VDC @ 0.5 A Maximum
-5.2 VDC ±0.25 VDC @ 0.18 A Maximum


 TTL Voltage
   (Logic Lines)

Optocouplers in Accordance with 5962-8876801PC or
5962-887-6901PC.  “Off” Equals No Current, “On”
Equals 10 mA Current


 Package Size

3.25″ X 3.00″ X 0.75″


 DC Line Connector

9 Pin Rectangular D Subminiature Connector in Accrdance
With MIL-C24308/8-1P


 Logic Line Connector

9 Pin Rectangular D Subminiature Connector in Accordance
with MIL-C24308/8-1P


 DC Filtering

Toroid in Accordance with 11473367-002.
The Windings on One Side of the Toroid Must be Wound in
the Opposite Direction of the Windings on the Other Side. 
Each Winding Shall Consist of 20 Turns of 22 Gauge Wire. 
One Filter for the +5V Line and its Return, One Filter for
the -5.2V Line and its Return.  The Filters Shall be
Individually Enclosed to Prevent Cross Talk Between the
Two Filters.

Environmental Ratings:

Our standard
environmental ratings are as follows, for specific
requirements please contact us…

 Temperature:
 -55 ºC to +85
ºC Operating
 -65
ºC to +110 ºC Non-Operating
 Humidity:  MIL-STD-202F,
Method 103B Cond. B
 Shock:  MIL-STD-202F,
Method 213B Cond. B
 Vibration:  MIL-STD-202F,
Method 204D Cond. B
 Altitude:  MIL-STD-202F,
Method 105C Cond. B

 Temperature Cycle:
 MIL-STD-202F,
Method 107D Cond. A

 

Outline Drawing:

Click here to see the Outline Drawing for
SWN-218-4DT-05-48-RN

 

Product Feature:

Click here to see the Product Feature for
SWN-218-4DT-05-48-RN

 

Test Data:

Click here to see the Test Data for
SWN-218-4DT-05-48-RN