SP2T Pin Diode Switch
Specifications:
| Frequency Range | 0.5 – 18 GHz |
| Insertion Loss | Reflective: 2.5 dB
Absorptive: 3.5 dB |
| Isolation | 0.5 – 2 GHz: 60 dB
2 – 18 GHz: 70 dB |
| VSWR | Reflective In/Out: 2.0:1
Absorptive In/Out: 2.0:1 Absorptive Out/Off: 2.0:1 |
| Speed | Rise: 10 ns Typical, 15 ns Maximum
Fall: 10 ns Typical, 15 ns Maximum Delay On: 75 ns Typical, 100 ns Maximum Delay Off: 75 ns Typical, 100 ns Maximum |
| Power Input | (CW) +20 dBm (Standard), +10 dBm (High Speed) |
| Survival Power | 1 Watt CW, 10 Watts Peak 1 usec |
| Control | TTL Logic “0”=On, “1”=Off |
| Power Supply | +5V @ 100 mA Maximum
– 5V @ 75 mA Maximum (Reflective) 100 mA Maximum |
Available Options:
Single
Control With Solder Pin Standard
| IND-SP | Independent Control With Solder Pin |
| 10M18 | 10 MHz to 18 GHz (Insertion Loss Increases |
by 1.5 dB at 10 MHz and 0.5 dB at 18 GHz)
100M18100 MHz to 18 GHz (Insertion Loss Increases
by 1.5 dB at 100 MHz and 0.5 dB at 18 GHz)
50M0550 – 500 MHz (No Change in Insertion Loss)
0520.5 – 2.0 GHz (No Change in Insertion Loss)
05180.5 – 18 GHz (No Change in Insertion Loss)
14F10.5 – 14.5 GHz (No Change in Insertion Loss)
121 to 2 GHz Frequency Range
1181 – 18 GHz (No Change in Insertion Loss)
2182 – 18 GHz (No Change in Insertion Loss)
4124 – 12.4 GHz (No Change in Insertion Loss)
500M80.5 – 8 GHz (No Change in Insertion Loss)
6186 – 18 GHz (No Change in Insertion Loss)
14F10.5 – 14.5 GHz (No Change in Insertion Loss)
121812 – 18 GHz (No Change in Insertion Loss)
100M20100 MHz – 20 GHz (Insertion Loss Increases by
1.5 dB at 100 MHz and 1.0 dB at 20 GHz)
2202 – 20 GHz (Insertion Loss Increases by 1.0 dB
at 20 GHz)
250M3250 MHz to 3 GHz Frequency Range
102010 – 20 GHz (Insertion Loss Increases by
1.0 dB at 20 GHz)
B01-12V Power Supplies
B02-15V Power Supplies
B03Reverse Logic “1” = On, “0” = Off
B04Driverless, Current Controlled
B05High Speed, Turnon/Turnoff 20 nS Maximum
when Applicable or Option HS
B06High Power – Specify CW Power, Peak Power,
Pulse Width, Duty Cycle,
RF Frequency and Bandwidth
B07Custom Designed Product –
Specify Initials of Customer
B08Low Video Transients –
Specify Video Bandwidth
B09Low Insertion Loss Version
B10Higher Isolation Version
HPR1WHigh Power of 1 Watt
LS750NSLow Speed of 750 nSec.
Environmental Ratings:
| Our standard environmental ratings are as follows, for specific requirements please contact us… |
|||||||||||||
|
Outline Drawing:
Click here to see the Outline Drawing of
SWN-218-2DR/DT-STANDARD
Product Feature:
Click here to see the Product Feature on
SWN-218-2DR/DT-STANDARD
Product Feature
(Absorptive/Non-Reflective, 50 to 500 MHz):
Click here to see the Product Feature on
SWN-218-2DT-STANDARD Option 50M05
Product Feature
(Absorptive/Non-Reflective, 0.5 to 8 GHz, High Power of 1
Watt):
Click here to see the Product Feature on
SWN-218-2DT-STANDARD-500M8-HPR1W
Product Feature (Reflective,
0.5 to 2.0 GHz):
Click here to see the Product Feature for
SWN-218-2DR-STANDARD Option 052
Product Feature (Reflective,
10.5 to 14.5 GHz):
Click here to see the Product Feature for
SWN-218-2DR-STANDARD Option 14F
Product Feature
(Absorptive, 1-2 GHz, 2-Watt Power, Low Video Transients, Low
Insertion Loss of 1.5 dB
Minimum, High Isolation of 80 dB Minimum, and Low Speed of 750
nSec.):
Click here to see the Product Feature for
SWN-218-2DT-STANDARD
Options 12, B06HPR2W, B08, B09, B10HI80DB, LS750NS
Test Data (100 MHz to 18 GHz,
+5V/-15V Power Supply, Reflective Version):
Click here to see Test Data on
SWN-218-2DR-STANDARD Options 100M18, B02
Test Data (250 MHz to 3 GHz,
High Power 10 Watts, Minus 15 Power Supply,
Absorptive/Non-Reflective Version):
Click here to see Test Data on
SWN-218-2DT-STANDARD Options B02, B06HPR10W, 250M3
Test Data (0.5 to 18 GHz,
Absorptive/Non-Reflective Version):
Click here to see Test Data on
SWN-218-2DT-STANDARD Option 0518
Test Data (2 to 18 GHz,
Absorptive/Non-Reflective Version):
Click here to see Test Data on
SWN-218-2DT-STANDARD Option 218