AMC Model SWN-1170-4DR/DT Option SS is a
Phase and Amplitude Matched SP4T
Reflective or Non-Reflective/Absorptive Switch Module with Low
Loss, High Speed,
and With Integral TTL Driver, Designed for Broad Band
Operations.
Specifications:
|
|
0.5 – 18 GHz |
|
|
Reflective: 3.0 dB Absorptive: 3.5 dB |
|
|
0.5 – 2 GHz: 80 dB 2 – 12 GHz: 60 dB 12 – 18 GHz: 50 dB |
|
|
Reflective In/Out: 2.0:1 Absorptive In/Out: 2.0:1 Absorptive Out/Off: 2.0:1 |
|
|
Rise: 10 ns Typical, 15 ns Maximum Fall: 10 ns Typical, 15 ns Maximum Delay On: 75 ns Typical, 100 ns Maximum Delay Off: 75 ns Typical, 100 ns Maximum |
|
|
(CW) +20 dBm (Standard), +10 dBm (High Speed) |
|
|
1 Watt CW, 10 Watts Peak 1 usec |
|
|
TTL Logic “0”=On, “1”=Off |
|
|
+5V @ 25 mA Maximum -5V @ 50 mA Maximum (Reflective) 150 mA Maximum (Absorptive/Non-Reflective) |
|
|
1.25″(L) X 1.25″(W) X 0.70″(H) |
|
|
1.5 Oz. |
Available Options:
Independent Control with
Solder Pin Standard
|
DEC-SP |
2 Bit Decoder with Solder Pin |
|
|
10 MHz to 18 GHz (Insertion Loss Increases by 1.5 dB at 10 MHz and 0.5 dB at 18 GHz) |
|
|
100 MHz to 18 GHz (Insertion Loss Increases by 1.5 dB at 100 MHz and 0.5 dB at 18 GHz) |
|
|
1 – 18 GHz (No Change in Insertion Loss) |
|
|
2 – 18 GHz (No Change in Insertion Loss) |
|
|
4 – 12.4 GHz (No Change in Insertion Loss) |
|
|
6 – 18 GHz (No Change in Insertion Loss) |
|
|
12 – 18 GHz (No Change in Insertion Loss) |
|
|
100 MHz – 20 GHz (Insertion Loss Increases by 1.5 dB at 100 MHz and 1.0 dB at 20 GHz) |
|
|
2 – 20 GHz (Insertion Loss Increases by 1.0 dB at 20 GHz) |
|
|
10 – 20 GHz (Insertion Loss Increases by 1.0 dB at 20 GHz) |
|
|
-12V Power Supplies |
|
|
-15V Power Supplies |
|
|
Reverse Logic “1” = On, “0” = Off |
|
|
Driverless, Current Controlled |
|
|
High Speed, Turnon/Turnoff 20 nS Maximum When Applicable or Option HS when Applicable |
|
|
High Power – Specify CW Power, Peak Power, Pulse Width, Duty Cycle, RF Frequency and Bandwidth |
|
|
Custom Designed Product – Specify Initials of Customer |
|
|
Low Video Transients – Specify Video Bandwidth |
|
|
Low Insertion Loss Version |
|
|
Higher Isolation Version |
|
|
0.40″ Thick Version |
|
|
0.88″ Thick Version |
Environmental Ratings:
| Our standard environmental ratings are as follows, for specific requirements please contact us… |
|||||||||||||
|
Outline Drawing:
Click here to see the Outline Drawing for
SWN-1170-4DR/DT Option SS
Product Feature:
Click here to see the Product Feature for
SWN-1170-4DR/DT Option SS
Test Report:
Click here to see the Test Report for
SWN-1170-4DR/DT
Option SS