AMC Model SWG-218-2DR/DT-IND-SMC is a SP2T
Reflective or Absorptive/Non-Reflective
Switch Module With Very Low Insertion Loss, High Isolation,
and with Integral TTL Driver,
Designed for Broad Band Operations.
Specifications:
|
|
0.5 – 18 GHz |
|
|
Reflective: 2.5 dB Absorptive: 3.5 dB |
|
|
0.5 – 2 GHz: 60 dB 2 – 18 GHz: 70 dB |
|
|
Reflective In/Out: 2.0:1 Absorptive In/Out: 2.0:1 Absorptive Out/Off: 2.0:1 |
|
|
Rise: 10 ns Typical, 15 ns Maximum Fall: 10 ns Typical, 15 ns Maximum Delay On: 75 ns Typical, 100 ns Maximum Delay Off: 75 ns Typical, 100 ns Maximum |
|
|
(CW) +20 dBm (Standard), +10 dBm (High Speed) |
|
|
1 Watt CW, 10 Watts Peak 1 usec |
|
|
+5V @ 100 mA Maximum – 5V @ 75 mA Maximum (Reflective) 100 mA Maximum (Absorptive/Non-Reflective) |
|
|
TTL Logic “0”= J1-J2 On, “1”= J1-J3 On |
|
|
RF: Removable SMA Female Control: Solder Pin |
|
|
0.75 Oz Typical |
|
|
1.10″(L) X 0.85″(W) X 0.38″(H) |
Available Options:
Independent
Control With SMC Male Connector Standard
|
IND-SP |
Independent Control With Solder Pin (Logic “0”=On, “1”=Off) |
|
|
Single Control With SMC Male |
|
|
Independent Control With SMC Male (Logic “0”=On, “1”=Off) |
|
|
10 MHz to 18 GHz (Insertion Loss Increases by 1.5 dB at 10 MHz and 0.5 dB at 18 GHz) |
|
|
100 MHz to 18 GHz (Insertion Loss Increases by 1.5 dB at 100 MHz and 0.5 dB at 18 GHz) |
|
|
1 – 18 GHz (No Change in Insertion Loss) |
|
|
2 – 18 GHz (No Change in Insertion Loss) |
|
|
4 – 12.4 GHz (No Change in Insertion Loss) |
|
|
6 – 18 GHz (No Change in Insertion Loss) |
|
|
12 – 18 GHz (No Change in Insertion Loss) |
|
|
100 MHz – 20 GHz (Insertion Loss Increases by 1.5 dB at 100 MHz and 1.0 dB at 20 GHz) |
|
|
2 – 20 GHz (Insertion Loss Increases by 1.0 dB at 20 GHz) |
|
|
10 – 20 GHz (Insertion Loss Increases by 1.0 dB at 20 GHz) |
|
|
-12V Power Supplies |
|
|
-15V Power Supplies |
|
|
Reverse Logic “1” = On, “0” = Off |
|
|
Driverless, Current Controlled |
|
|
High Speed, Turnon/Turnoff 20 nsec Maximum when Applicable or Option HS (Not Available With SMC Control) |
|
|
High Power – Specify CW Power, Peak Power, Pulse Width, Duty Cycle, RF Frequency and Bandwidth |
|
|
Custom Designed Product – Specify Initials of Customer |
|
|
Low Video Transients – Specify Video Bandwidth |
|
|
Low Insertion Loss Version |
|
|
Higher Isolation Version |
Environmental Ratings:
| Our standard environmental ratings are as follows, for specific requirements please contact us… |
|||||||||||||
|
Outline Drawing:
Click here to see the Outline Drawing for
SWG-218-2DR/DT-IND-SMC
Product Feature:
Click here to see the Product Feature for
SWG-218-2DR/DT-IND-SMC