American Microwave Corporation
7309-A Grove Road
Frederick, MD 21704

Phone:301-662-4700
Fax:301-662-4938
sales@americanmic.com
 

ISO -9001:2015

In Pursuit of Excellence
Through Engineering since 1978

SW-2183-1A

 
The Series SW-218 Switches are
Broadband, High Speed, Low Loss SPST Switches
With Integral Drivers.  They are Powered by +5 and -15
Volt Supplies and are
Available Powered by ±15 Volts.  They are Available in
Three Models that Operate
Over the Entire 0.5 to 18 GHz Band.  Each Features Rugged
Integrated Circuit
Assemblies of Chip PIN on a Microstrip Transmission Line and
Proprietary Wideband
Bias Decoupling Circuitry.  Switching is Accomplished by
a TTL Compatible Driver
Which is Controlled by the User.

Specifications:


 Frequency Range

0.5 – 18 GHz


 Isolation

40 dB Minimum


 Insertion Loss

2.3 dB Maximum


 VSWR (On Position)

1.9:1 Maximum


 Switching Speed

(10% – 90% RF) and (90% – 10% RF): 10 ns


 Standard TTL Delay

From 50% TTL to 90% RF for Turn-Off: 20 ns
From 50% TTL to 10% RF for Turn-On: 20 ns


 Power Handling Capability

Average: 2 Watts
Peak 1 usec, Maximum, pw: 10 Watts


 Power Supply

+15 VDC: 100 mA
+  5 VDC: 100 mA
– 15 VDC: 45 mA


 Control Impedance

TTL Compatible, Two Load. (A Load is 1.6 mA Sink Current
and 40 uA Source Current.)


 Control Logic

Logic “0” (-0.3 to +0.7 Volt) for Switch Off.
Logic “1” (+2.5 to +5.0 Volts) for Switch On.

 

Available Options:
 

 001

Two SMA Male RF Connectors


 002

One SMA Male and One SMA Female RF Connector


 003

Solder Type Control Terminals


 004

±15 Volt Power Supply Requirement
(+5, -15 Volt is Standard)


 005

50 Ohm Control Impedance


 006

Cannon MultiPin MDM9SSP


 007

Inverted Logic


 008

Extend Frequency to 100 MHz


 010

50 ns Maximum Switching Speed
(5 Watts CW Maximum)


 012

2 ns Maximum Switching Speed
(100 mw CW Maximum)


 013

-12 VDC Power Supply Requirement


 103

Integral Video Filters
(2-18 GHz Frequency Band)

Environmental Ratings:

Our standard
environmental ratings are as follows, for specific
requirements please contact us…

 Temperature:
 -65 ºC to +85
ºC Operating
 -65
ºC to +125 ºC Non-Operating
 Humidity:  MIL-STD-202F,
Method 103B Cond. B
 Shock:  MIL-STD-202F,
Method 213B Cond. B
 Vibration:  MIL-STD-202F,
Method 204D Cond. B
 Altitude:  MIL-STD-202F,
Method 105C Cond. B

 Temperature Cycle:
 MIL-STD-202F,
Method 107D Cond. A

 

Outline Drawing:

Click here to see the Outline Drawing for
SW-2183-1A

 

Product Feature:

Click here to see the Product Feature for
SW-2183-1A