MSN-4DR/DT-05-STANDARD

SP4T Pin Diode Switch

Specifications:

Frequency Range	0.5 – 18 GHz
Insertion Loss	Reflective: 3.0 dB Absorptive: 3.75 dB
Isolation	0.5 – 2 GHz: 60 dB 2 – 18 GHz: 70 dB
VSWR	Reflective In/Out: 2.0:1 Absorptive In/Out: 2.0:1 Absorptive Out/Off: 2.0:1
Speed	Rise: 10 ns Typical, 15 ns Maximum Fall: 10 ns Typical, 15 ns Maximum Delay On: 75 ns Typical, 100 ns Maximum Delay Off: 75 ns Typical, 100 ns Maximum
Power Input	(CW) +20 dBm (Standard), +10 dBm (High Speed)
Survival Power	1 Watt CW, 10 Watts Peak 1 usec
Control	TTL Logic “0”=On, “1”=Off
Power Supply	+5V@200 mA Maximum -5V@75 mA Maximum (Reflective) 100 mA Maximum (Absorptive/Non-Reflective)

Available Options:

Independent
Control With Solder Pin Standard

DEC-MP	2 Bit Decoder with MultiPin
DEC-SP	2 Bit Decoder with Solder Pin
MP-IND	Independent Control With MultiPin
10M18	10 MHz to 18 GHz (Insertion Loss Increases by 1.5 dB at 10 MHz and 0.5 dB at 18 GHz)
100M18	100 MHz to 18 GHz (Insertion Loss Increases by 1.5 dB at 100 MHz and 0.5 dB at 18 GHz)
0518	0.5 – 18 GHz (No Change in Insertion Loss)
118	1 – 18 GHz (No Change in Insertion Loss)
218	2 – 18 GHz (No Change in Insertion Loss)
412	4 – 12.4 GHz (No Change in Insertion Loss)
618	6 – 18 GHz (No Change in Insertion Loss)
1218	12 – 18 GHz (No Change in Insertion Loss)
100M20	100 MHz – 20 GHz (Insertion Loss Increases by 1.5 dB at 100 MHz and 1.0 dB at 20 GHz)
220	2 – 20 GHz (Insertion Loss Increases by 1.0 dB at 20 GHz)
1020	10 – 20 GHz (Insertion Loss Increases by 1.0 dB at 20 GHz)
B01 or B01MINUS12V	-12V Power Supplies
B02	-15V Power Supplies
B03	Reverse Logic “1” = On, “0” = Off
B04	Driverless, Current Controlled
B05	High Speed, Turnon/Turnoff 25 nS Maximum when Applicable
B06	High Power – Specify CW Power, Peak Power, Pulse Width, Duty Cycle, RF Frequency and Bandwidth
B07	Custom Designed Product – Specify Initials of Customer
B08	Low Video Transients – Specify Video Bandwidth
B09	Low Insertion Loss Version
B10	Higher Isolation Version

Environmental Ratings:

Our standard
environmental ratings are as follows, for specific
requirements please contact us…